Here you can see our current prices, order our products or check the content of your shopping cart.

By transmitting your order for one of the items listed below you agree to our Terms and Conditions.

The following table applies to purchases done by persons located in the European Union (EU),  Switzerland (CH) or Norway (NO):
 
Order No. 
Description
Price
(EC/CH/NO)
Order
(EU/CH/NO)
RR-TC
RAILROAD & CO. TrainController™ Version 5.8
RR-TC-55
RAILROAD & CO. TrainController™  Version 5.8
Upgrade from Version 5.5
Order
RR-TC-50
RAILROAD & CO. TrainController™  Version 5.8
Upgrade from Version 5.0
Order
RR-TC-40 RAILROAD & CO. TrainController™ Version 5.8
Upgrade from Version 4.x
Order




RR-TP  RAILROAD & CO. TrainProgrammer™ Version 5.8




RR-SH-S RAILROAD & CO. +Smarthand™  Starter Set (RS232-Version)
Includes one handheld, software drivers and the interface
for connection to the serial port of the computer.
RR-SH-U  RAILROAD & CO. +Smarthand™  Starter Set (USB-Version)
Includes one handheld, software drivers and the interface
for connection to the USB port of the computer.
RR-SH-H RAILROAD & CO. +Smarthand™  Handheld
Extends existing configurations by one additional handheld.
RR-SH-P RAILROAD & CO. +Smarthand™  Plug Panel
for connection of two additional handhelds
RR-SH-IS  RAILROAD & CO. +Smarthand™  PC Interface RS232
Is contained in the Starter Set. Only needed as replacement or extension.
RR-SH-IU  RAILROAD & CO. +Smarthand™  PC Interface USB
Is contained in the Starter Set. Only needed as replacement or extension.




RR-TN
RAILROAD & CO. +Net™  Starter Set Version 5.8
for operation of  2 Computers
RR_TN_E
RAILROAD & CO. +Net™  Extension Version 5.8
for operation of each additional Computer
RR-TN/D
RAILROAD & CO. +Net / D™  Starter Set Version 5.8
for operation of 2 Computers
RR-TN/D-E
RAILROAD & CO. +Net / D™  Extension Version 5.8
for operation of each additional computer




RR-TS
RAILROAD & CO. +4DSound™ Version 5.8




RR-TM
RAILROAD & CO. TrainMonitor™  Version 4.7




RR-TCUG
TrainController Users Guide (Info)
Printed Version 5.8 - 09/2006 - 256 pages
Includes the RAILROAD & CO. CD ROM !
RR-CD
RAILROAD & CO. CD ROM (Info)
All Programs and Manuals on CD ROM !
Version 5.8


The following table applies to purchases done by persons located outside the countries listed above:
 
Order No. 
Description
Price
(not EU/CH/NO)
Order
(not EU/CH/NO)
RR-TC
RAILROAD & CO. TrainController™  Version 5.8
RR-TC-55
RAILROAD & CO. TrainController™  Version 5.8
Upgrade from Version 5.5
Order
RR-TC-50
RAILROAD & CO. TrainController™ Version 5.8
Upgrade from Version 5.0
Order
RR-TC-40 RAILROAD & CO. TrainController™ Version 5.8
Upgrade from Version 4.x
Order




RR-TP  RAILROAD & CO. TrainProgrammer™  Version 5.8




RR-SH-S RAILROAD & CO. +Smarthand™  Starter Set (RS232-Version)
Includes one handheld, software drivers and the interface
for connection to the serial port of the computer.
RR-SH-U RAILROAD & CO. +Smarthand™  Starter Set (USB-Version)
Includes one handheld, software drivers and the interface
for connection to the USB port of the computer.
RR-SH-H RAILROAD & CO. +Smarthand™  Handheld
Extends existing configurations by one additional handheld.
RR-SH-P RAILROAD & CO. +Smarthand™  Plug Panel
for connection of two additional handhelds
RR-SH-IS RAILROAD & CO. +Smarthand™  PC Interface RS232
Is contained in the Starter Set. Only needed as replacement or extension.
RR-SH-IU RAILROAD & CO. +Smarthand™  PC Interface USB
Is contained in the Starter Set. Only needed as replacement or extension.




RR-TN
RAILROAD & CO. +Net™  Starter Set Version 5.8
for operation of  2 Computers
RR_TN_E
RAILROAD & CO. +Net™  Extension Version 5.8
for operation of each additional Computer
RR-TN/D
RAILROAD & CO. +Net / D
N/A N/A




RR-TS
RAILROAD & CO. +4DSound™ Version 5.8




RR-TM
RAILROAD & CO. TrainMonitor™  Version 4.7




RR-TCUG
New !! TrainController Users Guide (Info)
Printed Version 5.8 - 09/2006 - 256 pages - b&w
Includes the RAILROAD & CO. CD ROM !
RR-CD
New !! RAILROAD & CO. CD ROM (Info)
All Programs and Manuals on CD ROM !
Version 5.8

The upgrade to TrainProgrammer™, +Net / D™, +Net™ and +4DSound™ Version 5.8 is free of charge for all licensed users of the regarding products.

With regard to a successor of TrainMonitor™ Version 4.7 no decision has been done yet.


Unregistered Use vs. Registered Use

You may use any RAILROAD & CO. software as an unregistered user for a limited period of time without any charge. This gives you the opportunity to try the software thoroughly before spending money.

Unregistered use does not restrict the functionality of TrainController™ or TrainMonitor™ with the following exception:

The unregistered software closes the connection to your model railroad around 15 minutes after program start. After 30 days of actual use changes cannot longer be saved to the layout file. Days without usage of the software do not count as days of actual use. There are no other functional restrictions.

The following restriction applies, if TrainProgrammer™ is used without registration:

The unregistered software only allows writing of decoder values for the "freeware" decoder, which provides a restricted set of configuration variables only. This means that only a restricted number of configuration variables can be written into the decoder, if the software is used without registration. Reading of configuration variables is not restricted.

The registered use of each RAILROAD & CO. program is enabled with the license code, which you receive after paying the license fee. You only need the license code to change from unregistered to registered use. Especially there is no further difference in the software and therefore no need to download and install the RAILROAD & CO. program again.

Note, that the possession of a code, that removes the limitations of unregistered use, is not equivalent to the right to use the software (license). More detailed hints can be found in our Terms and Conditions or in the license conditions attached to each software program.


Information about the RAILROAD & CO. CD ROM:

The CD ROM contains all programs and manuals listed in the download section. The versions of all items contained on the CD and provided for download are identical.

The CD ROM can be ordered as a separate item, too, i.e. it is also possible to purchase the CD ROM prior or after purchase of a license of our software.

The CD ROM can be purchased additionally to or instead of downloading our software from the Internet. This is useful for backup purposes or if you want to install our products on a computer, that is not connected to the Internet.